|
|
|
|
|
One difference between the Picatinny rail and the Weaver rail is the size of these slots, although many rail-grabber-mounted accessories can be used on either type of rail. Weaver rails have a slot width of 0.180 in (4.572 mm), but are not necessarily consistent in the spacing of slot centers. The Picatinny locking slot width is 0.206 in (5.232 mm) and the spacing of slot centers is 0.394 in (10.008 mm).[1] Because of this, with devices that use only one locking slot, Weaver devices will fit on Picatinny rails, but Picatinny devices will not always fit on Weaver rails.[1] The other difference is that Weaver rails are continuous, while Picatinny rails are cut by the slots (like a dotted line) to neutralize expansion caused by barrel heating.
|
|
| |
|
| |
| 23 items found in "Mounts, Rails & Others" |
|
|
-
Offering secure mounting within the AR removable or fixed carry handle,
our enhanced mount enables the shooter the option of utilizing the iron
sights when a scope is mounted to the weapon. Constructed of high
strength reinforced composite, the Carry Handle Mount provides a true
Picatinny specification rail for attaching whatever optics your mission
dictates.
Fits the AR15, M16 and M4
Mounts securly on an AR fixed or removable carry handle
Allows the use of iron sights
Constructed of high strength reinforced composite
Pro...
More Information
-
Constructed of steel, the INTRAFUSE SKS Shell deflector is built for years of shooting. Its universal design allows our deflector to interface with most receiver scope mounts on the market, including the Tri Rail Receiver Cover Mount. Once properly installed, it prevents damage to optics and loss of weapon’s zero by deflecting spent cartridge casings.
More Information
-
Maintain the original look of your Yugoslavian 59/66 SKS by replacing
the unused grenade launcher with our functional muzzle brake. Featuring
25 multi-directional ports that reduce recoil and increase control, this
steel brake is machined with the same thread pitch as the original.
Plated with black oxide, this brake will complete the performance
transformation of your Yugo SKS. Fits M14 x 1RH threaded muzzles.
More Information
-
Constructed of a lightweight polymer, this sturdy magazine catch works
with fixed or detachable magazines. Fits Chinese, Russian, or Romanian
rifle magazines, but will not work on AK converted SKS rifles. Slight
fitting may be required.
More Information
-
Designed to work in place of the stock tube on the Intrafuse Stock
Systems. Our Sling Adaptor Plug allows for increased mobility and more
compact storage. Make your rifle a perfect "truck gun" and more
adapted for home defense. Provides a sling attachment point for single
point or 2-point configurations.
Works with the following Intrafuse Stock Systems:
- SKS Stock Systems
- Mini-14/Thirty Stock System
- Standard 10/22 Stock System
- 10/22 Tactical Trainer
- Mossberg an...
More Information
-
This Offset Tactical Mount is designed specifically for 1 Inch Flashlights and Lasers
Used in conjunction with a
Forward Vertical Grip, this Mount places your Flashlight or Laser at
the perfect location for Easy Thumb Activation
Mounts to virtually any Picatinny or Weaver Style Rail with the Easy to Use Slotted Thumb Nut
Constructed of Hard Anodized Aluminum providing a Rock Solid Platform yet is still incredibly Light Weight.
More Information
-
45 Degree Offset Rail
allows the attachment of Lasers, Flashlights, Red Dot Sights or other
Tactical Accessories necessary to get the job done.
Offset Canted Design
creates more Mounting Versatility eliminating interference with Vertical
Grips, Handguards, Optics, and other accessories.
Perfect for Mounting a Backup Reflex Sight side by side with your Primary Optic.
Ergonomic Design gives easy access to on/off switches for Flashlights, Lasers, or Red Dot Sights.
...
More Information
-
For the ultimate back to the basics and durable detachable AR-15 carry handle, the NcSTAR MARDCH detachable carry handle is the high quality detachable AR-15 carry handle you’ve been looking for at a great price.
Precision made AR-15 Carry Handle and A2 rear sight. The MARDCH will fit virtually all AR-15, M4, and M16 flattop Picatinny rail upper receivers.
The MARDCH quickly converts your flattop
AR-15...
More Information
-
For solid and dependable back-up fixed A2 rear sight, the NcSTAR MARDRS
does not take up much of your valuable Picatinny rail space. You can
have a back-up iron sight ready to go at a moment’s notice and have
space for a red-dot/ reflex/ holographic optic on your AR-15 upper
receiver.
The MARDRS will fit virtually all AR-15, M4, and M16 flattop Picatinny rail upper receivers.
A2 rear sight assembly w...
More Information
-
For a durable and compact flip-up front A2 iron sight the NcSTAR MARFLF is the AR-15 back-up front iron sight that should equip your AR-15 rifle.
Precision made flip-up A2 front sight. The MARFLF will fit virtually all AR-15 Picatinny rail gas blocks.
Manufactured from steel and aluminum, the MARFLF will not melt on your gas block under sustained shooting, unlike other manufacturers plastic ba...
More Information
-
For a durable and compact flip-up rear A2 iron sight the NcSTAR MARFLR is the AR-15 back-up rear iron sight that you’re looking for.
Precision made flip-up A2 rear sight. The MARFLR will fit virtually all AR-15, M4, and M16 flattop Picatinny rail upper receivers.
A2 rear sight assembly with
large and small rear aperture. A2 rear sight is fully adjustable
for windage with knurled click adjustable controls.
Lar...
More Information
-
Specs:
Tactical weaver style tri-rail and receiver cover
Replaces existing receiver cover
Adjustable side weaver tabs
Weight:10.50 oz
Length:5.00"
More Information
-
Description:
Enables three picatinny rails.
Mountpicatinny based accessories on your shotgun
State of the art ergonomic design.
Durable, hardwearing & lightweight construction.
Quick & easy installation.
No gun smiting required.
Improves thermal insulation.
Constructed from reinforced polymer composite.
More Information
-
Description:
The FAB Defense phosphate finished steel sling adapter plate - for use with any AR15 - M16 - M4 with a collapsible butt stock.
Replace your standard issue receiver end plate to enable rear reciever sling attachment points.
Provides two rear receiver sling loops enabling attachment of a tactical sling in either left or right hand configuration.
Easy installation - Simply remove and re-install your existing collapsible stock and buffer tube after repla...
More Information
-
Description:
Very compact in size.
Smaller than a mini-Uzi.
Includes:
one-point tactical sling adapter.
fold-to-the side compact buttstock with rubber buttpad. innovative
patented design which locks the gun to the frame in both the front and
back, making it a ‘rock-solid’ system.
Allows: use of the original iron sight.
Note: flip or red-dot sight not required. mounting of a foregrip, flashlight, optics, laser and/or iron sight. ...
More Information
-
Weaver Mount for 1" Flashlight or Laser
...
More Information
-
Let the fun begin! NcSTAR introduces The Golf Ball Launcher that
attaches to virtually any AR-15 with a threaded barrel. This simple to
use design is ready to go by simply removing the Flash Hider from your
AR-15 and installing The Golf Ball Launcher. Then you load Blank
Ammunition into your rifle, drop the ball into the launcher, and propel
golf balls down range!
AR-15/M16 Golf Ball Launcher
...
More Information
-
Product Details
This
Muzzle Device Alignment Set is made to replace the peel washer commonly
shipped with muzzle brakes and suppressors and to be used with our fake
cans to properly align the wording. *For use with 1/2 x 28 threads
only*
Instructions:
This shim set is comprised of 3 different sized shims: 1 large, 8 medium, and 1 small.
The
large shim can be used to give the installer one half of a rotation or
as a spacer for barrels that do not have relief cuts behind the
threads...
More Information
-
Specs:
SKS Gas tube weaver style mount. Replaces existing gas tube
Weight:9.00 oz
Length:9.65"
More Information
-
Replace your original
locking plate with this and you have a perfect attachment point. This
high strength end plate is constructed of heat treated alloy steel and
finished with a Mil-Spec black manganese phosphate finish. The unique
ambidextrous attachment opening allows for 180 degree range of
motion for a smooth transition from one shoulder to the other. The slim design also ensures that it
will not interfere with your hand or other gear while shooting.
More Information
-
Offering secure mounting within the AR removable or fixed carry handle, our enhanced mount enables the shooter the option of utilizing the iron sights when a scope is mounted to the weapon. Constructed of high strength reinforced composite, the Carry Handle Mount provides a true Picatinny specification rail for attaching whatever optics your mission dictates.
Fits the AR15, M16 and M4
Mounts securly on an AR fixed or removable carry handle
Allows the use of iron sights
Constructed of high strength reinforced composite
Provides a Pi...
More Information
-
Offering secure mounting within the AR removable or fixed carry handle, our enhanced mount enables the shooter the option of utilizing the iron sights when a scope is mounted to the weapon. Constructed of high strength reinforced composite, the Carry Handle Mount provides a true Picatinny specification rail for attaching whatever optics your mission dictates.
Fits the AR15, M16 and M4
Mounts securly on an AR fixed or removable carry handle
Allows the use of iron sights
Constructed of high strength reinforced composite
Provides a Pi...
More Information
-
Description:
Enables three picatinny rails.
Mountpicatinny based accessories on your shotgun
State of the art ergonomic design.
Durable, hardwearing & lightweight construction.
Quick & easy installation.
No gun smiting required.
Improves thermal insulation.
Constructed from reinforced polymer composite.
More Information
|
|
|
