TK40 is the first four-core LED flashlight of Fenix, which provide high brightness and long-throwing beam. CREE MC-E four-core LED, max output reaches 630 Lumens, which makes it the world’s brightness AA flashlight. Optimized circuit with large reflector throw 300m long lighting beam. Intelligent memory circuitry memorizes last primary output when activating the light. TK40 is of great power with 8*AA; the battery is inexpensive and widely available; moreover, with the 4*AA series-wound and 2*AA shunt-wound structure, the battery department is quite solid. Besides, the TK40 could also be powered by only 4*AA under urgency situation. This light is suitable for outdoor hunting, exploring as well as searching.
Features of Fenix TK40:
• Cree MC-E LED with lifespan of 50,000 hours • 2 modes with 8 types of output:
4 types of strobe mode: Strobe -> Slow flash -> SOS - > Fast flash
• Digitally regulated output - maintains constant brightness • Uses eight 1.5V AA batteries, can works on 4 batteries in emergency (not included) • Dimensions • Length: 208mm / 8.18in • Diameter: 39.2mm / 1.54in • Head: 62mm / 2.44in • Weight: 284grams / 10.0oz (excluding batteries) • Made of T6 aircraft-grade aluminum • Durable Type III hard-anodized anti-abrasive finish • Waterproof to IPX-8 Standard • Toughened ultra-clear glass lens with anti-reflective coating • Push-button tailcap switch • Capable of standing up securely on a flat surface to serve as a candle • Included accessories: shoulder strap, two spare o-rings and rubber switch boot.
Important information about using batteries in TK40 flashlight
1. Please use only batteries of the same type, brand, capacity and state of charge. Do not mix new batteries with used batteries or regular batteries and rechargeable batteries. Do not use lithium batteries in this flashlight. Failing to do so may result in battery leakage which may cause damage to the flashlight.
2. The flashlight automatic overheating protection may cause the light to flicker during prolonged running in a hot environment. Please do not use turbo mode for more than 15 minutes. If this occurs please turn to a lower output mode to cool the flashlight. Normal operation will be restored once the light cools down.
3. If you do not plan to use flashlight for a few days, please turn the head counter-clockwise 2.5 turns to prevent slow discharge of batteries.
4. If the flashlight will not be used for a long time, please remove batteries from the light.
